Description
Transparent Medium Topaz is a good deep tan or light brown color. Any bead artist who works with earth tones, skin tones, or fire colors, should have a hank or two of this on hand.
Transparent glass allows light to pass through the bead, liked stained glass. This makes transparent beads appear extra shiny. Aurora Borealis (AB, for short) is the name for the rainbow affect. Transparent AB tend to have a subtle rainbow appearance that deepens the bead color. This is more pronounced on dark colors and warm shades. Use next to a matte bead to draw out the rainbow affect.
2-cuts are great for powwow beadwork. They have a certain sparkle and flash but are more economical than other cut beads. They do have sharp edges on the ends and can cut threads. We do not recommend these for peyote stitch, bead-weaving, loomwork, or any other beading technique where the ends touch threads. For applique/flat stitching, if you're having a problem with broken threads, here is our advice. When pulling the thread through the bead, be sure to pull it straight out of the hole. Do not pull it up and against the edge, this can cause your thread to fray and eventually break.
Size 11 (or 11/0) 2-cuts measure approximately 1.9mm. The hole of the bead is at least 0.7mm in diameter. Sold by the hank; hanks contain 12 20-inch strands. Made in the Czech Republic.
View AllClose
Transparent glass allows light to pass through the bead, liked stained glass. This makes transparent beads appear extra shiny. Aurora Borealis (AB, for short) is the name for the rainbow affect. Transparent AB tend to have a subtle rainbow appearance that deepens the bead color. This is more pronounced on dark colors and warm shades. Use next to a matte bead to draw out the rainbow affect.
2-cuts are great for powwow beadwork. They have a certain sparkle and flash but are more economical than other cut beads. They do have sharp edges on the ends and can cut threads. We do not recommend these for peyote stitch, bead-weaving, loomwork, or any other beading technique where the ends touch threads. For applique/flat stitching, if you're having a problem with broken threads, here is our advice. When pulling the thread through the bead, be sure to pull it straight out of the hole. Do not pull it up and against the edge, this can cause your thread to fray and eventually break.
Size 11 (or 11/0) 2-cuts measure approximately 1.9mm. The hole of the bead is at least 0.7mm in diameter. Sold by the hank; hanks contain 12 20-inch strands. Made in the Czech Republic.